Reliable Industrial High Speed  Roller Doors

The High speed automatic opening and closing of these vertical rapid roll doors will provide valuable energy saving by maintaining the internal room temperature and also reduce contamination from airborne pollution and ingress of insects and vermin, essential in controlled warehouses and buildings.

The environment is also improved dramatically by controlling vehicle traffic flow, easing the vehicle access on the most used doors and improving safety in the workplace

With a travel speed of up to 3 metres a second with some doors the operation cycle can be completed in a very short time indeed, keeping the inside atmosphere as stable as possible all year round. Access control can be with remote control, readar sensors, ground loops, push button, key cards, digital code pads, finger readers and other devices all to suit your individual needs in the warehouse or factory.

With a travel speed of up to 3 metres a second with some doors the operation cycle can be completed in a very short time indeed, keeping the inside atmosphere as stable as possible all year round. Access control can be with remote control, readar sensors, ground loops, push button, key cards, digital code pads, finger readers and other devices all to suit your individual needs in the warehouse or factory.

All the high speed doors we supply meet the very highest levels of safety and are tested, CE approved and offer long term durability through some very technologically advanced features.

Stylish Industrial High Speed Doors Options To Choose From

Hormann HS 5015 PU H

The high speed HS5015 is effectively a high speed insulated sectional door.

For higher thermal insulation requirements we recommend the 67 mm-thick sections with a thermal insulation value of up to 0.64 W/(m²·K). The optional ThermoFrame also improves the thermal insulation for this version by up to 15% (for 25 m² door surface).

67mm steel sandwich section, PU-foamed, with thermal break.

The adjustable track application H (High-Lift Track Application)
The sections are guided in horizontal tracks and can be diverted flexibly depending on the fitting situation. Thus, the door can be fitted behind or above supply lines and crane tracks. Thanks to the belt mechanism with counter weights, the door is especially low-wear and long-lasting thanks to the belt mechanism.
view more

Hormann V 6020 TRL

The Hormann V6020 TRL high speed door can be utilised as both an internal and external door, it is fully transparent allowing a high volume of light into internal areas as an external door and offers additional vision when used as an internal door.

Light and friendly workplaces
The fully transparent high-speed door V 6020 TRL is suitable for high ingress of light as an outside door but also for an improved view in internal areas. The 4 mm thick transparent curtain lets light into the room resulting in a pleasantly bright workplace. When used as an external door, we recommend the heavy transparent version.

Seeing what is approaching you
The routes of transport are made safer as a result of the free field of vision, also from far away.

Wind lock
Along with the tensioning system fitted as standard, the spring steel wind locks provide the required curtain stability.

Hormann HS 5015 ACOUSTIC H

The quiet and quick Hormann V 5030 SEL, quintessential to areas which need to maintain a low noise level. The V 5030 SEL can reach optimum speeds of 3.0m/s (with the optional Hormann frequency converter control).

Quiet and quick
In halls with a low noise level, a door should cause little noise and also work quickly and reliably with strong drafts. That’s why the V 5030 SEL door type is equipped with spring steel wind protectors to give the curtain the necessary stability.

The speed of up to 3 m/s is achieved by the optional Hörmann AS 500 FU E frequency converter control.

Spring steel wind protector
Integrated into a pocket in the curtain with twin track rollers at the sides for a quiet door travel and improved resistance to higher wind pressure.

view more

Hormann V 4015 SEL ALU R

The Hormann V 4015 SEL R. Thanks to its compact tubular drive and the alignment of the barrel drive and the guide rail, the V 4015 SEL R looks smart from both an internal and external point of view.

With the anodised aluminium surface finish of the side elements and top plates, the standard shaft cover in White aluminium RAL 9006, the integrated wiring and few visible screw fittings, the door is very elegant and can also be used in the customer sector.

The door is equipped with light grille and SoftEdge profile for a high level of security and cost-effectiveness. The light grille stops the door immediately if a person or vehicle is in the door opening.

view more

Hormann V 10008

The Hormann V 10008 – the perfect high speed door for large spaces. Boasting a maximum width of 10000mm and a maximum height of 6250mm, it is ideal for oversized openings used regularly by large equipment e.g. heavy machinery. Despite the heavy curtain weight, reliable door travel is ensured due to the especially wide guide rails and a double tensioning belt.

Large Garage doors
The standard FU control and double closing edges on the bottom profile ensure that the closing force is maintained and provide the door with its required safety.

Spring steel wind protectors in curtain pocket
The tandem track rollers ensure quiet door travel and allow for higher wind pressures. The number of wind protectors is determined depending on the door size, wind pressure requirements, as well as the installation situation.

view more

Hormann V 6030 SEL

  • Bringing you the Hormann V 6030 SEL, Hormann’s fast external door with anti-crash protection. This product is designed especially for highly frequented routes of transport. Fabricated with spring steel wind protectors, the twin track rollers situated at each side of the curtain ensure quiet door travel and reliable stops.
  • The fast external door with anti-crash protection
    External doors are driven into more frequently than internal doors, e.g. by forklift trucks, so this is where the anti-crash protection system comes into its own. Downtimes and repair costs are considerably reduced. And the high speeds at which the door opens and closes saves on energy costs too.
  • Spring steel wind protectors in curtain pocket
    The twin track rollers at the sides ensure quiet door travel and reliable stops. Even wind pressures do not pose a problem thanks to the spring steel wind protectors.
view more

Hormann V 5015 SEL

  • Type V 5015 SEL is a flexible tube drive fast action door with a fabric curtain, designed for internal applications. The V 5015 SEL doors incorporate a galvanized steel frame with aluminium profiles for curtain stability, the doors are also equipped with a photocell for traffic monitoring and a soft edge bottom profile, operation is via a powerful frequency converter control (FU). The barrel cover is limited to the door width and is also available in a choice of material and finishes.
  • Maximum Width 5000mm, Maximum Height 5000mm

  • Speed* opening/closing:Standard control, BK 150 FUE H 1.5/0.8 m/s, *max., depending on the door size
  • Curtain
  • With aluminium profile
  • Fabric/vision panel thickness 1.5/2.0 mm
  • New: From a height of 3000 mm, you can optionally receive the door with two vision panels for better visual contact during forklift traffic and thus greater safety.
view more

Hormann V 5015 SEL

The Hormann HS 7030 PU is a high speed smooth-faced aluminium spiral door also available in sectional overhead form. It includes non-contact roll-up technology which saves wear on the shutter curtain and preserves the visual aesthetics of the door.

Where a high speed door is required for any building the HS 7030 provides you with 2 or even 3 doors in one getting over the traditional method of a basic external roller shutter door in front of a fabric high speed or ‘fast action’ roller door, neither of which offer any insulation at all. By the very nature of looking to have a high speed door an importance has been placed on the control of the atmosphere inside the building so a door which offers high speed operation, insulation, and security all in one is surely the only answer!

The Hormann HS 7030 PU has many innovative features:

  • High Speed in a unique non contact technology design – Low maintenance
  • Thermally insulated on all sides with excellent U values – Control the temperature
  • Stability with a long service life – Excellent security
  • Easily repairable profile slats – Easy to maintain and repair

The video below shows the high speed and unique action of this f

view more

More information 

Made in Britain 

Frequency inverter control is fitted as standard on all Hormann high speed doors to ensure the fastest speeds and the lowest rate of wear. The entire door mechanism is relieved through the slow start and slow brake action taking undue stress off the components. We offer both single and three phase electric operation with the added option of an uninterruptible power supply to ensure the door will open in a power failure situation.

The high speed door range includes both vertically and horizontally opening transparent doors with a flexible curtain. They are readily available to be installed in combination with sectional overhead doors and roller shutters, as well as with the powerful new technology of the spiral doors with smooth, strong aluminium profiles.